There are some situations that after you cleaned/upgraded/downgraded the ME region, the laptop exhibits the same symptoms as before. In this scenario, there is a possibility that the BIOS region or is faulty.
These are the common use cases where this method is applicable.
- No display or No power even after cleaning, upgrading/downgrading the ME/TXE region
- Creating stock firmware for Dell for newer models
- Creating stock firmware for Asus laptops
Go to this section if you want to repair or clean the ME/TXE region.
Mostly for Dell laptops, especially newer ones, you need to extract the firmware first using the Dell extraction method to obtain the BIOS, ME and EC firmware as shown in the example below. After that, you then use the Repair BIOS Region button to replace the BIOS REGION of your firmware dump.